Open the unit and locate the WHITE and BLUE wires
that are attached to the motor unit. Cut these wires about 2 inches
from the motor and strip back all four cut ends about 3/8 ".
Attach the WHITE wire on the motor to the GREEN wire on the
DECOY BRAIN and also attach the BLUE wire on the
motor to the BLACK wire on the DECOY BRAIN.
Attach the WHITE wire cut loose from th motor to the RED wire on
the DECOY BRAIN and also attach the BLUE wire cut loose
from the motor to the BLACK wire on the
DECOY BRAIN.
If upon testing the DECOY BRAIN does not work
at all then simply reverse the RED and BLACK wires mentioned
in the previous steps.
Refer to the Switch
Settings and Motion Decoys
Tips and Tricks Pages for information on proper operation and
Suggestions.
